Write iso to usb drive

For example, if you're putting a Windows installation ISO image onto the flash drive, and you get this option, you'd want to enable it for sure. Leave the Partition scheme , Target system , File system , and Cluster size options alone unless you know what you're doing or you've been advised to set any of those parameters to something else.

In that case, make that change before continuing. You're welcome to enter a custom volume label in the Volume label field, but leaving it at whatever the default happens to be, or even blank, shouldn't have any impact on anything. Under Format Options , inside the Show advanced format options menu, you'll see a number of You can leave all of them in their default state, but you're welcome to select Check device for bad blocks if you have some concern that the flash drive or USB device you're using may have an issue.

Choosing 1 pass is just fine in most cases but knock that up to 2 or more if you've had issues with this drive before.

Read any warning messages and address them appropriately. Take this message seriously! Make sure the flash drive or other USB device is empty or that you're fine with erasing everything on it.

You might also see a Download required message if Rufus needs some additional files to complete the burn process. Selecting Yes will start that download. Wait while Rufus properly formats the USB drive so it's bootable, and then copies all the files to the drive that are contained in the ISO image you selected earlier.

The total time to do this depends very much on how large the ISO file is that you're working with. Some small diagnostic tools take under one minute, while larger images like a 5 GB Windows 11 ISO could take closer to 20 minutes.

Your computer and USB hardware speeds are a big factor here as well. Now that the ISO file is properly "burned," you can boot from the USB device and then continue with whatever it is you're using this drive for. For example, if you've put a memory testing program on a flash drive, you can now boot from that flash drive and test your RAM with it.

The same goes for bootable hard drive testing programs , data wipe programs, antivirus tools , etc. Booting from a USB drive is often as easy as plugging the drive in to any free USB port and then restarting your computer , but it can sometimes be much more complicated. See the tutorial linked above if you need help. You're more than welcome to use the procedure we've outlined above with Rufus for Windows ISO images, like those you might have downloaded for Windows 11, Windows 10, etc.

However, there is a more "official" procedure that uses free software from Microsoft. We've written complete tutorials on these procedures, which also includes guidance on other aspects of installing Windows from a USB stick.

Use your favorite file compression program—we often recommend the free 7-Zip tool, but there are many others —to extract the contents of the ISO image directly onto the previously-formatted flash drive.

That's it! Follow the prompts to burn the ISO image to the disc. Yes, you can! To make a copy of Windows 10 on a USB flash drive , download and launch the Windows Media Creation tool , select Create installation media and follow the prompts. Then download and install Rufus to complete the process.

Run UNetbootin and follow the prompts. Actively scan device characteristics for identification. XBoot is another utility that has the ability to create multi-boot USB flash drives.

WBI Creator is a portable application without installation. If you are advanced users, you can create bootable USB keys manually with Unetbootin. After you burn ISO to USB drive and reinstall operating system successfully, you may need a powerful password reset application to protect your PC and the data. Then Tipard Windows Password Reset is a smart choice.

First of all, Windows Password Reset Platinum has a user-friendly interface. You can find all the features you need on the concise interface. Moreover, Windows Password Reset Platinum is able to reset and manage Windows password in Windows pre-installation environment. That is the safest way to reset Windows password. Or you will get stuck in Step 3. Moreover, non-certified USB drives can also be used. As for the capacity size, 13GB is enough. Attention : If available, you can use a USB 3.

You can download the free Demo version. Usually, the software will detect all inserted USB drives on your computer automatically. If not, refresh it. Then choose the USB you will use. With it, you can enter a WinPE environment and use this software to repair Windows boot failure problems by rebuilding MBR , checking and fixing possible bad sectors. Also you can delete or format the boot partition which cannot be done within Windows.